二是要看蜂窩活性炭產品所產生的氣泡，如果產生的氣泡越多則產品的質量就越好。我們可以做一個小實驗，將一小把蜂窩活性炭產品投入水中，由于水滲透的作用，水會隨之浸入活性炭的孔隙中，以此來讓孔隙中的空氣排出，從而產生一連串的極為小的氣泡，在水中拉出一條細小的氣泡線，同時又發出了茲茲的氣泡聲，看著十分有趣。如果這種現象發生的很劇烈的話，而且持續的時間越長，那么就證明蜂窩活性炭產品的孔隙結構非常發達，就是蜂窩活性炭的吸附性越好的表現。
  
  The two is to look at the honeycomb activated carbon products produced by the bubble, if the bubble is more the better the quality of the product. We can do a little experiment, a handful of honeycomb activated carbon products into the water, because the water penetration effect, water will be immersed in the pores of activated carbon, so the pore in the air, resulting in a series of very small bubbles, pulled out a tiny bubbles lines in the water, at the same time also issued Zizi bubble sound, looked very interesting. If this phenomenon is very serious, and the longer the duration, then it is proved that the honeycomb activated carbon product pore structure is very developed, that is, the better adsorption performance of honeycomb activated carbon.

 ◇蜂窩狀活性炭制備方法
  
  怎樣制作活性炭?活性炭制作流程有哪些?簡而言之，活性炭的制作分碳化及活化兩步。
  
  一、活性炭的制備首先要對原料進行碳化
  
  碳化也稱熱解，是在隔絕空氣的條件下對原材料加熱，一般溫度在600℃以下。有時原材料先經無機鹽溶解處理后再碳化?；钚蕴吭牧辖?jīng)碳化后，會分解放出水氣、一氧化碳、二氧化碳及氫等氣體;原料分解成碎片，并重新結合成穩定的結構。這些碎片可能是由一些晶體組成。晶體是由兩片以上的、有碳原子以六角晶格排列的片狀結構堆積而成。但堆積無固定的晶型。晶體的大小和原材料的成份和結構有關，并受碳化溫度的影響，大致是隨碳化溫度的升高而增大的。碳化后晶體邊界原子上還附有一些殘余的碳?xì)浠衔铩?/div>