軟管泵壓輥的調整
泵出廠時，壓輥已按正常情況調整到位，如遇物料吸不上，或在泵的額定壓力下，口量達不到要求，請調整壓輥的偏心距，其步驟如下：
（1）先將泵殼兩側相應的圓孔有機玻璃蓋板與泵出口端的長方形有機玻璃蓋板打開，將轉子壓輥旋轉至兩圓孔之間，其螺栓正對圓孔，然后用套筒扳手將兩端螺栓擰松，再用小圓棒或十字螺絲刀，對準標有0，1，2，3的圓孔，撥動壓輥一側內的偏心套轉動，偏心套的數字越大，其壓輥與泵殼間的距離越小，軟管壓的越緊，其調整是以轉子的頂端的刻線為基準，數字越大，壓的越緊，反之亦然。
（2）調整間隙時一定要注意不要壓的過緊，以達到流量為準，壓的越緊，對膠管的壽命影響越大。

軟管泵可應用于多用移動泵站的結構 :自吸高度可達到9米，水平自吸可達200米以上，無需灌泵。特別適合于市政下水道系統的污水、污泥抽排。無堵塞、雜質通過能力強。普通的塑料袋、沙石、編織袋、泥漿、毛發等雜物都不會影響泵的使用。采用原輪泵，耐干運行，泵體堅固耐用、壽命長。使用快速連接接頭，方便進出口管道的裝配。 整車設計緊湊、適應于狹小空間使用。使用便捷拆卸式防雨布、或硬質鋼板隔音罩，低噪音設計，符合環保標準要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.