生產工藝：本公司系列軟管具有使用壽命長、適用范圍廣等特點，它結構是經過一層或多層高強度合成纖維編織層，增強了耐磨性、抗撕裂性軟管的內襯和外襯均擠壓成型，內襯采用一系列的復合橡膠。管體柔軟，富有高強彈性，具有極優越的耐磨性能。采用新型原材料，增強管體的整體性能。在使用過程中生熱低，彈性復原性好，經久耐用。膠管具有良好的耐正壓和負壓，具有良好的耐酸、堿、油、高溫等特點，可以輸送當今90%以上的化學品。主要成份有天然橡膠（耐一般的弱酸及酒精）、丁基橡膠（耐油脂、堿金屬和清潔劑等）和三元乙丙橡膠（適用于酮、酒精及濃酸）等。軟管的使用溫度≤100℃，考慮生產過程中會產生熱量，一般用于介質溫度<80℃的工況。若在通風（或冷卻）散熱條件較好的情況下，介質溫度可以到100℃。若物料溫度≥120℃，需選用特殊耐熱軟管。輸送有衛生級介質（如食品、醫藥等），可采用特制的衛生級軟管。另可根據用戶需要進行非標設計。     

軟管泵工作原理：
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.