電工鋼硅鋼片寶鋼可以提供從變壓器鐵心設計材料選擇到變壓器制造，包括：核心設計中的材料選擇，以控制性能和成本；從成本和性能角度優化鋼材和結構；為核心制造提供技術支持，以確保 性能；新產品和新技術，提高變壓器產品的競爭力。工作經驗：40多年前從事晶粒取向電工鋼，具有完整的研發、山西臨汾本地制造和應用能力產品：產品種類繁多，包括對流、山西臨汾本地高磁導率、山西臨汾本地疇細化、山西臨汾本地低磁致伸縮和無鉻酸鹽涂層晶粒取向電工鋼等級：鐵損P1.7/50低于0.55W/kg的 級能力：中國有史以來 家開發出具有制造100％優質晶粒取向電工鋼。晶粒取向電工鋼產量居世界 。寶鋼不斷更新和改進性能變壓器用產品數據庫，為自定義ers提供一系列來自機械性能的全套數據和基本磁性能下的特殊性質工作條件根據不同的要求，

電工鋼硅鋼片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Specific total loss (iron loss) is the total power consumed per unit mass of material when the magnetic polarization waveform remains sinusoidal, with a specific peak and frequency. The specific total loss is represented by the symbol P (Jm/f), in W/kg. Example: P1.5/50 represents the specific total loss at a maximum magnetic polarization intensity of 1.5T and a frequency of 50Hz. 3.2 Magnetic Polarization Q/BQB 480-20212 Magnetic polarization intensity refers to the peak magnetic polarization intensity of a specific magnetic field intensity when a sample is subjected to alternating magnetization. Its symbol is J (H), and the unit is T (Tesla). Example: J5000 represents the peak magnetic polarization intensity corresponding to a magnetic field intensity peak of 5000A/m. The material grades in this document are classified based on the nominal maximum specific total loss P1.5/50 (W/kg) at a magnetic polarization strength of 1.5T and a frequency of 50Hz, as well as the nominal thickness of the material. They are further divided into three categories based on product characteristics: ordinary type, stress relief annealing type, and high-efficiency type. Example 1: B35A210 represents a common non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 2.10W/kg； Example 2: B35AR300 represents a stress relieved annealed non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific total loss value P1.5/50 is 3.00W/kg； Example 3: B35AH230 represents an efficient non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. Example 4: 35WW210 represents a normal type WW non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.10W/kg. Example 5: 35WH230 represents an efficient WH non oriented electrical steel with a nominal thickness of 0.35mm, and the maximum nominal specific loss value P1.5/50 is 2.30W/kg. The classification and code of insulation coatings shall comply with the provisions of Table 2. Table 2 Classification and Code of Insulation Coatings Type Code Characteristics of Insulation Coatings Semi organic Thin Coating A Improves Punching Performance and Has Good Weldability Semi organic Thick Coating H has Good Punching Performance and High Interlayer Resistance Semi organic Chromium Free Thin Coating K does not contain chromium and has good weldability Semi organic Chromium Free Thick Coating M does not contain chromium and has good insulation performance Semi organic Chromium Free Extreme Thick Coating J does not contain chromium and has excellent insulation performance Semi organic Chromium Free Ultra Thick Coating L does not contain chromium and has extremely high insulation performance Self adhesive Coating

電工鋼硅鋼片半有機無鉻薄涂層K H4 C-5 EC-5-P C-6涂層通常以磷酸鹽無機成分為主，添加少量有機成分，不含有鉻元素，杜絕了用戶退火、山西臨汾本地發藍和使用過程中發生六價鉻含量超標的可能性，性、山西臨汾本地環保性 。性能基本接近A 涂層，絕緣性好，沖片性好，在中性氣氛或弱還原性爐子氣氛中，可承受的應力退火溫度一般可達800℃，在退火時，層間電阻會有一定降低。半有機無鉻厚涂層M --- C-5 EC-5-P C-6涂層基本情況和 K 涂層類似，膜厚增加，絕緣性更好，耐蝕性更好，沖片性也更好，焊接性略差。