軟管泵是由泵殼、轉子體、機座、軟管、減速電機以及電控系統等部分組成。轉子體旋轉，轉子體上的一對壓輥沿著一根特制的膠管旋轉，壓輥與泵殼產生的擠壓力將膠管壓扁，在管子自身彈性和側導輥的作用下，通過恢復原狀產生的真空吸入物料，物料從管內排出，這樣往復循環。 

The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.

 

軟管泵可應用于多用移動泵站的結構 :自吸高度可達到9米，水平自吸可達200米以上，無需灌泵。特別適合于市政下水道系統的污水、污泥抽排。無堵塞、雜質通過能力強。普通的塑料袋、沙石、編織袋、泥漿、毛發等雜物都不會影響泵的使用。采用原輪泵，耐干運行，泵體堅固耐用、壽命長。使用快速連接接頭，方便進出口管道的裝配。 整車設計緊湊、適應于狹小空間使用。使用便捷拆卸式防雨布、或硬質鋼板隔音罩，低噪音設計，符合環保標準要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.

 

工業軟管泵(俗稱：供給泵、高泥泵、脫流泵等)是吸收了國外先進技術而開發的一種新型的、多功能、多用途工業泵。它擺脫了傳統泵葉輪和軸密封的運行模式，具有極大的優勢，尤其是在粘度大、腐蝕性大、流體雜質大的介質輸送上面。 軟管泵的優勢：特有的無密封結構，無任何泄漏和污染；采用先進的滾動技術，壓輥不需要任何潤滑；自吸能力強并具有自清理能力，能正反吸料；簡易的軟管裝配，安裝維修簡單，維修費用低，操作簡單；流量可進行線性調節，并有一定的計量功能；對粘度大有雜質的流體輸送不產生任何堵塞；泵的使用壽命長，揚程高和泵口壓力大。