我們的軟管泵_攔水帶成型機多種場景適用產品視頻已經準備好，它將為您呈現產品的完美細節，讓您為之驚嘆不已。


以下是:黑龍江大興安嶺軟管泵_攔水帶成型機多種場景適用的圖文介紹



多用途移動泵站的主要用途：
多用途移動泵站基于泵設計開發，大流量軟管泵是市政給排水中常用的一種泵型，擁有大量的潛在用戶，其產品主要用于污水、初沉污泥、濃縮污泥等的抽排輸送。由于轉子泵具備自吸能力強、耐干轉、流量范圍大、耐磨損的特點受到國內設計單位和使用單位的青睞。

The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.




豫信致誠機械設備(大興安嶺市分公司)成立至今，秉承“雙贏”的發展理念，贏得了國內一大批企業、個人、商家的信任和支持！

豫信致誠機械設備(大興安嶺市分公司)重視人才、技術，實施的現代企業動作機制，堅持以“以客為本精益求精”的宗旨和持續發展的理念，不斷完善【水渠機】，推陳出新，以滿足不同客戶的需求。



軟管泵用途非常廣泛，市面上的諸多場合均可適用，如：污水泵井事故清空，污水泵站事故抽空，水廠的污水池、污泥池清空。市政下水道系統的污水、污泥清空抽排。工廠、罐車事故后的油品、液體物質、化學污泥等的緊急轉移；事故后地表沖洗水抽吸泵。消防應急水轉移；緊急供水泵站，泵內部過流部件都可配備不銹鋼，數臺泵車串聯使用可作為臨時供水泵站。軍隊、海軍部隊?wèi)?zhàn)備后勤泵車。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.

 




軟管泵的潤滑保養注意事項：
（1）側導輥每隔24小時用油槍從注油咀注油（高溫鋰基脂GB5671—91）一次，注油時注意側導輥的松緊情況，若發現過松，用尖咀鉗將其旋緊，使側導輥處于良好的潤滑狀態，如發現側導輥有異常聲音，經調整松緊，仍不能，應考慮側導輥內銅套是否磨損，將其拆下?lián)Q銅套。
（2）壓輥每隔三個月拆下來保養一次，給內腔和軸承加高溫鋰基脂（GB5671—91）。
（3）轉子軸承每隔三個月加高溫鋰基脂（GB5671—91）一次。
（4）新的減速機在運行一段時間后，將油箱內的機油放掉，重新加30＃機油。            
點擊查看豫信致誠機械設備(大興安嶺市分公司)的【產品相冊庫】以及我們的【產品視頻庫】