軟管泵的的選擇和輸送粘液的特點的進化也隨著各種新材料的開發和應用，成為推動軟管泵技術發展的一個重要因素。軟管泵的零部件采用了各種各樣的新材料，所帶來的好處主要是延長了軟管泵在腐蝕性介質中的使用壽命和可靠性，并擴展了軟管泵的使用范圍。同時，涂覆技術和材料的表面處理技術在改善軟管泵的流動特性、耐腐蝕性和耐磨性方面變得日益重要，具有廣闊的應用前景。                          

軟管泵采用外裝動、靜環式機械密封，可直接水沖洗，耐高壓，不易磨損，無泄漏。 體積小，流量大，揚程壓力高，適用長距離與高阻力定量輸送。 <br />
泵的葉輪與傳動齒輪分開，且在泵腔內各零配件之間保證一定的間隙，相互不接觸，無磨損，低噪音，可靠性好，使用壽命長，節能降耗。<br />
配置變頻器后，可以隨意調節流量，并可做一般計量泵使用。                        

軟管泵工作原理：
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.