想要一睹M250-35A5電工鋼帶產品的風采嗎?這個視頻將用直接的方式展示產品的卓越性能,保證讓您大飽眼福。
以下是:湖北黃岡M250-35A5電工鋼帶的圖文介紹
為保證客戶提貨方便及時,常年備有 新能源電工鋼現貨。在廣大客戶和同仁的大力支持下,我公司業務輻射到全國各行業。鹿程國際貿易(黃岡市分公司)的經營理念是:誠信為立業之本 公司的服務宗旨:為客戶創造價值!熱忱歡迎廣大新老客戶聯洽合作事宜,共同謀求發展!
電工鋼硅鋼片本文件規定了公稱厚度為 0.35mm、湖北黃岡本地0.50mm 和 0.65mm 全工藝?yán)滠垷o(wú)取向電工鋼帶的術語和定義、湖北黃岡本地分類和代號、湖北黃岡本地一般要求、湖北黃岡本地技術要求、湖北黃岡本地檢驗和試驗、湖北黃岡本地包裝、湖北黃岡本地標志及檢驗文件等要求。本文件適用于寶山鋼鐵股份有限公司生產的、湖北黃岡本地用于磁路結構的、湖北黃岡本地以終退火狀態交貨的全工藝?yán)滠垷o(wú)取向電工鋼帶產品(以下簡稱產品)。2 規范性引用文件下列文件中的內容通過文中的規范性引用而構成本文件必不可少的條款。其中,注日期的引用文件,僅該日期對應的版本適用于本文件;不注日期的引用文件,其 版本(包括所有的修改單)適用于本文件。GB/T 228.1-2010 金屬材料 拉伸試驗 第 1 部分:室溫實驗法GB/T 2521.1 全工藝?yán)滠堧姽や?第 1 部分:晶粒無取向鋼帶(片)GB/T 2522GB/T 2791電工鋼片(帶)表面絕緣電阻、湖北黃岡本地涂層附著性測試方法膠粘劑 T 剝離強度試驗方法 撓性材料對撓性材料GB/T 2900.60 電工術語 電磁學GB/T 3655 用愛潑斯坦方圈測量電工鋼片(帶)磁性能的方法GB/T 4340.1 金屬材料 維氏硬度試驗 第 1 部分:試驗方法GB/T 8170 數值修約規則與極限數值的表示和判定GB/T 9637 電工術語 磁性材料與元件GB/T 17505 鋼及鋼產品交貨一般技術要求GB/T 18253 鋼及鋼產品檢驗文件的類型GB/T 19289 電工鋼片(帶)的密度、湖北黃岡本地電阻率和疊裝系數的測量方法YB/T 4292 電工鋼帶(片)幾何特性測試方法Q/BQB 400-2020 冷軋產品的包裝、湖北黃岡本地標志及檢驗文件IEC60404-8-4 Specifications for individual materials –Cold-rollednongrain-oriented electrical steel strip and sheet deliveredin the fully-processed state
電工鋼硅鋼片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Since it is a functional material, its performance testing also revolves around "function". These indicators are often mentioned in trade and processing processes, and a brief understanding can help everyone better carry out their work. The performance testing of electrical steel mainly includes the following aspects: magnetic inspection, stacking coefficient inspection, coating adhesion inspection, repeated bending inspection, size and shape surface inspection, and conventional mechanical property inspection. In addition to the types of products listed above, there are also some special purpose electrical steel plates, such as 0.15 and 0.20mm thick 3% Si cold-rolled non oriented silicon steel strips and 0.025, 0.05, and 0.1mm thick 3% Si cold-rolled oriented silicon steel strips, which are used as intermediate and intermediate grade High frequency motors and transformers, as well as pulse transformers, etc; 0.7mm thick 3% Si high-strength cold-rolled non oriented silicon steel plate for relays and power switches; High strength cold-rolled electrical steel plate for new high-speed motor rotors; Low carbon electrical steel hot-rolled thick and cold-rolled plates for magnetic shielding and high-energy accelerator electromagnets such as medical magnetic resonance tomography scanners; 4.5% to 6.5% Si high silicon steel plates for high-frequency motors, transformers, and magnetic shielding.
Generally, motors, transformers, and other electrical components are required to have high efficiency, low power consumption, small size, and light weight. Electrical steel plates are usually guaranteed to have magnetic properties based on core loss and magnetic induction strength. Magnetic induction strength is the number of magnetic lines passing through a unit cross-sectional area of the iron core, also known as magnetic flux density. It represents the material‘s magnetization ability, measured in T. The magnetic induction strength of electrical steel plates is high, and the excitation current (also known as no-load current) of the iron core is reduced. Copper and iron losses are also reduced, which can save electrical energy. When the power of the motor and transformer remains constant, the magnetic induction intensity is high, and the design Bm can be increased. The cross-sectional area of the iron core can be reduced, which reduces the volume and weight of the iron core, and saves the amount of electrical steel plates, wires, insulation materials, and structural materials used. This can reduce the total loss and manufacturing cost of the motor and transformer, and is beneficial for the manufacturing, installation, and transportation of large transformers and motors. The main requirements for the performance of silicon steel are:
1. Low iron loss is the most important indicator of the quality of silicon steel sheets. Various countries classify grades based on iron loss values, with the lower the iron loss, the higher the grade.
2. Under strong magnetic fields, the magnetic induction intensity (magnetic induction) is high, which reduces the volume and weight of the iron core of the motor and transformer, saving silicon steel sheets, copper wires, and insulation materials.
3. The surface is smooth, flat, and the thickness is uniform, which can improve the filling coefficient of the iron core.
4. Good lamination performance is more important for manufacturing micro and small electric motors.
5. The adhesion and weldability of the surface insulation film are good, which can prevent corrosion and improve the punching performan
電工鋼硅鋼片硅鋼是一種硅鐵合金。用硅鋼軋制的片材是電工領域中應用廣的軟磁材料,因而硅鋼片又稱電工鋼片。硅鋼片廣泛用于電動機、發電機、變壓器、扼流圈、電磁機構、繼電器及測量?jī)x表中電機工業大量使用厚度為0.35~0.50mm的硅鋼片,用于:中型旋轉機,壓縮電機,通用馬達,小型精密電機,電動汽車,壓縮機,通用電機,電源變壓器,精密變壓器,節能電機,焊機變壓器,穩壓器,磁性密封器,加速器用電磁鐵,汽車電機等;在電信高頻技術中常用0.05~0.20mm的薄帶鋼片,以便更有效地降低渦流損耗。熱軋硅鋼片厚度為0.35~0.50mm,密度為7.55~7.70g/cm3,多用于大、中、小型交、直流電動機;冷軋無取向硅鋼片厚度為0.35~0.50mm,密度為7.65~7.75g/cm3,多用于大型交流發電機、電動機,大、中、小型交、直流電動機;冷軋取向硅鋼片厚度為0.23mm 0.27mm 0.3mm 0.35mm,密度為7.65g/cm3,多用于電力變壓器、油浸式變壓器,干式變壓器,電抗器、磁放大器等;冷軋取向薄帶厚度為0.05~0.20mm,多用于無線電高頻變壓器。
點擊查看鹿程國際貿易(黃岡市分公司)的【產品相冊庫】以及我們的【產品視頻庫】